Description - MV105 3C, 8kV Copper Tape Shield:

The MV105 3C 8kV Copper Tape Shield is a designated medium voltage multi-conductor, shielded power cable. Primary power and distribution circuits in industrial and commercial installations. True Triple extrusion system and closed handling raw materials system, to eliminate any contact with ambient, until the extrusion process ends.

Approvals - MV105 3C, 8kV Copper Tape Shield:

UL listed as MV-105                          
UL 1072                                                               
ICEA S-93-639/NEMA WC74:          
Shielded power cables 5,000 to 46,000V     
ICEA S-97-682: utility                        
Shielded power cables 5,000 to 46,000V
AEIC CS8: extruded dielectric shielded
Power cables 5,000 to 46,000V

Construction - MV105 3C, 8kV Copper Tape Shield:

• Stranded soft annealed bare copper conductor, Class B per ASTM B496 or hard drawn Aluminum-1350 compacted class B per ASTM B 400.
• Semi-conducting cross-linked polyethylene (XLPE) conductor shield.
• Thermoset Ethylene Propylene Rubber (EPR) insulation.
• XLPE Insulation shield, coloured strings (black, red and white)     
• Soft annealed uncoated copper tape, 5 mil thick, 25% min overlap.
• Optional ground wire - one or three soft annealed bare copper or covered conductors cabled with phase conductors.
• Black Oil Resistant, sunlight resistant and flame retardant Polyvinyl Chloride (PVC) compound jacket. *EPR/CPE jacket available upon request.

Temperature Rating - MV105 3C, 8kV Copper Tape Shield:

105°C Normal Operating Temperature

Voltage Rating - MV105 3C, 8kV Copper Tape Shield:

8kV 100% and 133% IL

Application - MV105 3C, 8kV Copper Tape Shield:

The MV105 3C 8kV copper tape shield is typically used for power circuits in generating plants where line to ground faults current are within shield capabilities. May be used in wet or dry locations, installed in cable trays, raceways, ducts and open-air, aerially or directly buried as permitted by NEC.