MV105 5kV Copper Tape Shield, EPR Insulated, CPE Jacketed

Download Spec Sheet More info!

Sycor Part No	AWG	Stranding	Conductor Diameter (in)	Temp	Voltage Rating	UL Style	100% Insulation Thickness	100% Jacket Thickness	100% Approx Weight Copper	100% Approx Weight Alum.	133% Insulation Thickness	133% Jacket Thickness	133% Appr. O.D (in)	133% Approx Weight Copper	133% Approx Weight Alum.
MV105C5KT100-6	6	7	0.17	105°C	5kV	1072	0.39	60	267	211	0.39	60	0.61	267	211
MV105C5KT100-4	4	7	0.21	105°C	5kV	1072	0.43	60	336	246	0.43	60	0.66	336	246
MV105C5KT100-2	2	7	0.27	105°C	5kV	1072	0.49	60	438	296	0.49	60	0.71	438	293
MV105C5KT100-1	1	19	0.30	105°C	5kV	1072	0.52	60	505	325	0.52	60	0.74	505	325
MV105C5KT100-1/0	1/0	19	0.34	105°C	5kV	1072	0.55	60	590	363	0.55	60	0.78	590	363
MV105C5KT100-2/0	2/0	19	0.38	105°C	5kV	1072	0.59	60	694	408	0.59	60	0.82	694	408
MV105C5KT100-3/0	3/0	19	0.42	105°C	5kV	1072	0.64	80	861	500	0.64	80	0.91	861	500
MV105C5KT100-4/0	4/0	19	0.48	105°C	5kV	1072	0.69	80	1023	569	0.69	80	0.96	1023	569
MV105C5KT100-250	250 MCM	37	0.52	105°C	5kV	1072	0.75	80	1170	633	0.75	80	1.02	1170	633
MV105C5KT100-300	300 MCM	37	0.57	105°C	5kV	1072	0.80	80	1350	706	0.80	80	1.07	1350	706
MV105C5KT100-350	350 MCM	37	0.62	105°C	5kV	1072	0.85	80	1529	777	0.85	80	1.11	1529	777
MV105C5KT100-400	400 MCM	37	0.66	105°C	5kV	1072	0.89	80	1706	849	0.89	80	1.16	1706	849
MV105C5KT100-500	500 MCM	37	0.74	105°C	5kV	1072	0.97	80	2055	981	0.97	80	1.23	2055	981
MV105C5KT100-600	600 MCM	61	0.81	105°C	5kV	1072	1.05	80	2436	1146	1.05	80	1.34	2436	1146
MV105C5KT100-750	750 MCM	61	0.91	105°C	5kV	1072	1.15	80	2950	1339	1.15	80	1.44	2950	1339
MV105C5KT100-1000	1000 MCM	61	1.06	105°C	5kV	1072	1.30	80	3804	1657	1.30	80	1.59	3804	1657

Available in 100% and 133% insulation levels. Please contact us to enquire.

Download Spec Sheet

Description - MV105 5kV Copper Tape Shield:

The MV105 5kV Copper Tape Shield cable is a designated medium voltage shielded power cable.

Approvals - MV105 5kV Copper Tape Shield:

UL listed as MV-105
UL1072
ICEA S-93-639/NEMA WC74:
Shielded power cables 5,000 to 46,000V
ICEA S-97-682: utility
Shielded power cables 5,000 to 46,000V
AEIC CS8: extruded dielectric shielded
Power cables 5,000 to 46,000V

Construction - MV105 5kV Copper Tape Shield:

Stranded, soft annealed bare copper conductor
(Aluminum conductor available upon request)
Semi-conducting cross-linked polyethylene (XLPE) conductor shield
Thermoset Ethylene Propylene Rubber (EPR) insulation
Semi-conducting cross-linked Polyethylene (XLPE) insulation shield
Soft annealed bare copper tape (5 mil thickness) 25% overlap, binder tape
Black oil resistant and flame retardant thermoset Chlorinated Polyethylene (CPE) jacket

Application - MV105 5kV Copper Tape Shield:

The MV105 5kV Copper Tape Shield cable is typically used for primary power and distribution circuits in industrial and commercial installations. Power circuits in generating plants where line to ground fault current are within shield capabilities. May be used in wet or dry locations, installed in cable trays, raceways, duct and open-air, aerially or directly buried as permitted by NEC.

Temperature Rating - MV105 5kV Copper Tape Shield:

105°C – Normal Operating Temperature.

Voltage Rating - MV105 5kV Copper Tape Shield:

5kV 100% and 133% IL

All specifications are provided for reference only. Specifications will vary between manufacturers and are subject to change without notice. Be sure to check with your sales rep for the most accurate and up to date information when ordering.