- PVC Insulated Hook up Lead Wire
- XLPE Insulated Hook up & Lead Wire
- Silicone Insulated Hook Up & Lead Wire
- Kynar® Insulated Hook up & Lead Wire
- Tefzel® (ETFE) Insulated Hook Up & Lead Wire
- Teflon® (PTFE) Insulated Hook Up & Lead Wire
- Neoprene® Rubber Insulated Hook Up & Lead Wire
- EPR Insulated Hook Up & Lead Wire
Technical Information
AWG to Metric - Stranded & Solid
Mil-W-16878 Lettering Guide
Meter and Feet Conversions
Kilogram and Pound Conversions
Celsis and Fahrenheit Conversions
Inch And Centimeter Conversions
Kilometre and Mile Conversions
- SRML – (Braided Silicone Motor Lead 250°C )
- SRML-K Braided Silicone Rubber Motor Lead, UL3231, UL3410, 200°C
- SGI - High Voltage Ignition, UL3257, 250°C
- TGGT – UL5127, UL5180, UL5214, UL5256, UL5257 (Teflon Glass Glass Teflon) 250°C
- TCGT – UL5288, UL5331 (Teflon Ceramic tape Glass Teflon) 250°C
- MGT – UL5107, UL5128, (Mica tape Glass Teflon) 450°C
- MGS – UL5359 (Mica tape Glass Silicone) 450°C
- Thermocouple High Temperature Wire
- CSA SEW-1, UL SF-1 200°C, 300 Volts
- CSA SEW-2, UL SF-2 200°C, 600 VOLTS
- CSA SEWF-1, UL SFF-1 (Flexible) 150°C, 300 Volts
- CSA SEWF-2, UL SFF-2 (FLEXIBLE) 150°C, 600 VOLTS (SRML)
- Braidless Silicone Fixture & Motor Lead UL3212, UL3213, UL3214, CSA AWM
- CSA AWM Type UL1198, UL1199, PTFE
- CSA AWM, UL1164 - 150°C, UL1180 - 200°C, 300 Volts
- Type GPT – Lighting & Primary Wire
- Type HDT – Lighting & Primary Wire - Heavy Wall
- Type TWP – Primary Wire – Thin Wall
- Type GXL – Primary Wire - Thin Wall
- Type SXL – Primary Wire
- Type TXL – Primary Wire – Extra Thin Wall
- Type SGT – Starter, Ground or Battery Cable
- Type SGX – Starter, Ground or Battery Cable
- Marine Engine & Component Wire
- PVC Trailer Cable Automotive Wire
- PVC Flat Jacketed Brake Cable
- MV-90 Wet/Dry, EPR Insulated, PVC Jacketed 2.4 kV Non Shielded
- MV-90 XLPE Insulated 2.4 kV Non Shielded
- MV90 XLPE Insulated PVC Jacketed Wire-Shielded Cable 5kV - 35kV
- MV90 XLPE Insulated PVC Jacketed Copper Tape-Shielded Cable 5kV - 35kV
- MV105 EPR Insulated CPE Jacketed Copper Tape-Shielded Cable 5kV - 35kV
- MV105 EPR Insulated PVC Jacketed Copper Tape-Shielded Cable 5kV - 35kV
- MV105 3C, EPR Insulated PVC Jacketed Copper Tape-Shielded Cable 5kV - 35kV
- DLO – Diesel Locomotive 2kv
- Jumper Cable - 15kv, Non-Shielded
- Stage Lighting - UL1581 Power Cable
- Type SEOOW-A
- Type SJEOOW-A
- Type SOOW-A
- Type SJOOW-A
- Type SOW-A-SOW
- Type SJOW-A-SJOW
- Station Z Wire
- Type G & G-GC
- Type SJO
- Type SO 90°C
- Type STO
- Type SJTO
- Portable Cord Type SJ
- Portable Cable Type SJT
- Type SV
- Type SVT
- Type SVO
- Type W- Round
- Types SPT-1 & SPT-2
- PO (Polyolefin) Heat Shrink – 2:1
- PVC (Polyvinyl Chloride) Heat Shrink - 2:1
- FEP (Teflon) Heat Shrink Tubing – 1.3:1 & 1.7:1
- FEP (Teflon) Heat Shrink Tubing - 2:1
- PTFE/FEP Dual Wall Heat Shrink Tubing - Shrink Varies
- PTFE Heat Shrink 2:1 - LW, TW, SW & HW
- PTFE (Polytetrafluoroethylene) Heat Shrink - 4:1
- Ultra Thin PTFE Heat Shrink Tubing - Shrink Varies
- Kynar® Heat Shrink Tubing – 2:1
- Viton® Heat Shrink Tubing – 2:1
- PVC Non-Shrinkable Tubing
- Polyethylene (PE) Tubing
- Industrial Teflon® (PTFE ETFE FEP PFA) Tubing
- Teflon® (PTFE ETFE FEP PFA)- Spaghetti Tubing
- Silicone Tubing
- Convoluted PTFE Tubing
- Expando Sleeving
- Corrugated Tubing/Sleeving Split/Solid Loom
- Spiral Wrap Tubing/Sleeving
- Re-sealable Zipper Wrap Tubing
- Heat-Treated Fiberglass Sleeving
- Heat-Treated Coloured Fiberglass Sleeving
- PVC Fiberglass Sleeving
- Silicone Fiberglass Sleeving
- Acrylic Fiberglass Sleeving