MV105 8kV Copper Tape Shield, EPR Insulated, PVC Jacketed

Download Spec Sheet More info!

Sycor Part No	AWG	Stranding	Conductor Diameter (in)	Temp	Voltage Rating	UL Style	100% NOM. Diam. Over Insul.	100% Jacket Thickness	100% Approx Weight Copper	100% Approx Weight Alum.	133% NOM. Diam. Over Insul.	133% Jacket Thickness	133% Appr. O.D (in)	133% Approx Weight Copper	133% Approx Weight Alum.
MV1058KT100-6	6	7	0.17	105°C	8kV	1072	0.44	60	291	234	0.49	60	0.71	324	267
MV1058KT100-4	4	7	0.21	105°C	8kV	1072	0.48	60	361	271	0.53	60	0.75	395	306
MV1058KT100-2	2	7	0.27	105°C	8kV	1072	0.54	60	465	322	0.59	60	0.80	502	359
MV1058KT100-1	1	19	0.30	105°C	8kV	1072	0.57	60	532	352	0.62	80	0.88	605	425
MV1058KT100-1/0	1/0	19	0.34	105°C	8kV	1072	0.61	60	618	392	0.66	80	0.91	694	468
MV1058KT100-2/0	2/0	19	0.38	105°C	8kV	1072	0.61	80	760	473	0.70	80	0.95	803	517
MV1058KT100-3/0	3/0	19	0.42	105°C	8kV	1072	0.65	80	833	532	0.74	80	1.00	938	577
MV1058KT100-4/0	4/0	19	0.48	105°C	8kV	1072	0.74	80	1057	602	0.80	80	1.05	1104	650
MV1058KT100-250	250 MCM	37	0.52	105°C	8kV	1072	0.80	80	1205	667	0.85	80	1.11	1255	718
MV1058KT100-300	300 MCM	37	0.57	105°C	8kV	1072	0.85	80	1386	742	0.90	80	1.16	1439	794
MV1058KT100-350	350 MCM	37	0.62	105°C	8kV	1072	0.90	80	1567	814	0.95	80	1.20	1621	868
MV1058KT100-400	400 MCM	37	0.66	105°C	8kV	1072	0.94	80	1744	885	0.99	80	1.25	1801	941
MV1058KT100-500	500 MCM	37	0.74	105°C	8kV	1072	1.02	80	2122	1047	1.07	80	1.35	2182	1107
MV1058KT100-600	600 MCM	61	0.81	105°C	8kV	1072	1.10	80	2480	1189	1.15	80	1.43	2544	1253
MV1058KT100-750	750 MCM	61	0.91	105°C	8kV	1072	1.20	80	2997	1384	1.25	80	1.53	3065	1452
MV1058KT100-1000	1000 MCM	61	1.06	105°C	8kV	1072	1.35	80	3855	1705	1.40	110	1.74	4033	1883

*Available in 100% and 133% Insulation Levels.
Cables that comply with 8 kV 100% can be marked 5K 133%.

Download Spec Sheet

Description - MV105 8kV Copper Tape Shield:

The MV105 8kV Copper Tape Shield is a designated medium voltage shielded power cable.

Approvals - MV105 8kV Copper Tape Shield:

ICEA S-93-639/NEMA WC 74
ICEA S-97-682
AEIC CS8
UL listed as MV-105.
UL 1072

Construction - MV105 8kV Copper Tape Shield:

Soft annealed bare copper conductor, Class B per ASTM B496.
Semi-conducting cross-linked polyethylene (XLPE) conductor shield.
Thermoset ethylene-propylene rubber (EPR) insulation.
SC XLPE insulation shield.
Copper tape 5 mil thick 25% minimum overlap metallic shield.
Oil Resistant, black sunlight resistance and flame retardant polyvinyl chloride (PVC) jacket.

Application - MV105 8kV Copper Tape Shield:

The MV105 8kV Copper Tape Shield is typically used for primary power and distribution circuits in industrial and commercial installations. True Triple extrusion system and closed handling raw materials system, to eliminate any contact with ambient, until extrusion process ends. Power circuits in generating plants where line to ground fault current are within shield capabilities. May be used in wet or dry locations, installed in cable trays, raceways, ducts and open-air, aerially or directly buried as permitted by NEC.

Temperature Rating - MV105 8kV Copper Tape Shield:

105°C Normal Operating Temperature

Voltage Rating - MV105 8kV Copper Tape Shield:

8 kV 100% and 133% IL

All specifications are provided for reference only. Specifications will vary between manufacturers and are subject to change without notice. Be sure to check with your sales rep for the most accurate and up to date information when ordering.